Impact Powder Feeder EvoCSII
The Impact Powder Feeder EvoCSII conveys the powder particles evenly through a powder pipe to the Impact Gun with the help of the carrier gas. The basic body of the Impact Powder Feeder EvoCSII is designed for an operating pressure of up to 100 bar. The vessel and the conveyor unit are available in two different versions. On the one hand in 60 bar and on the other hand in 80 bar operating pressure, whereby the respective variants are protected against incorrect installation with a code. An adjustable vibrator is used to transfer poorly flowing powder to the conveyor unit. The vibrations loosen up the powder, which provides a better flow.
A conveyor disc is included as standard in the scope of delivery. Additional conveyor disks can be purchased depending on the powder properties. The Impact Powder Feeder EvoCSII is fully integrated into the control unit Impact EC-GM-Unit EvoCSII, so that all relevant parameters can be called up and recorded at any time.
For removal and cleaning, the powder vessel including the conveyor unit can be easily removed from the Impact Powder Feeder EvoCSII and can be replaced immediately with another. This avoids long downtimes and the process can be continued quickly. The cleaning and replacement of wearing parts is very user-friendly thanks to the well thought-out design. In addition, it is equipped with an operating hours counter, which allows conclusions to be drawn about the duration of use.
- Key factors Impact Powder Feeder EvoCSII
- Uniform conveyance of the powder
- Fully integrated in the control system
- Conveyor discs can be exchanged
- Delivery pressure up to 80 bar
- Convenient changing and cleaning of the powder container
Impact Powder Feeder Station EvoCSII
The Impact PF-Station EvoCSII offers space for up to four Impact Powder Feeder EvoCSII. Depending on your needs, you can choose between two and four parking spaces. The two parking spaces can easily be expanded to four parking spaces. An X-connector enables four Impact Powder Feeder EvoCSII to be used at the same time. If an Impact Powder Feeder EvoCSII has to be serviced, the emergency stop circuit can be closed with the blind plate supplied. Therefore it is possible, depending on the existing configuration, to continue the process with an Impact Powder Feeder EvoCSII less. Each parking space is anchored in the system with a permanently assigned number in order to avoid mix-ups.
Equipping the Impact PF-Station EvoCSII is easy and safe thanks to the guidance of the legs. The Impact Powder Feeder EvoCSII is placed in the elongated hole guides and can then easily slide towards the pipe connections. The working posture is much more ergonomic due to the height of the Impact PF-Station EvoCSII, since the Impact Powder Feeder EvoCSII is accessible in an upright position. In order to reduce noise emissions, the ventilation can simply be routed into the soundproofed spray booth.
- Key factors Impact PF-Station EvoCSII
- Operation of up to four powder feeders simultaneously
- Ergonomic working height
- Variable placement of the connections
- Safe storage of the powder feeder
- Reduced noise emissions thanks to a central ventilation line
